Function: General purpose 24 Volt DC instrument power supply unit. The DIN700 will isolate and convert 110 Volts AC or 240 Volts AC 50/60Hz to 24 Volts DC for use with loop powered transmitters or 24 Volt DC powered instruments. For example the DIN700 can be used to supply up to six units from the AlphaMINI range of Signal Conditioning Equipment and Trip Amplifiers or any of the Flow, Level, Pressure, Temperature or Relative Humidity transmitters located elsewhere in this catalogue.

Power supply: mains powered

Function: Stabilised variable transducer power supplies with one isolated output. The output can be user adjusted by means of a potentiometer located in the fascia of the instrument. The range of variation is between 5 Volt DC and 24 Volt DC.

Power supply: DC powered

Function: Stabilised variable transducer power supplies with two isolated outputs. Each output can be user adjusted by means of a potentiometer located in the fascia of the instrument. The range of variation is between 5 Volt DC and 24 Volt DC.

Power supply: DC powered

Function: Stabilised variable transducer power supplies with one isolated output. The output can be user adjusted by means of a potentiometer located in the fascia of the instrument. The range of variation is between 5 Volt DC and 24 Volt DC.

Power supply: mains powered

Function: Stabilised variable transducer power supplies with two isolated outputs. Each output can be user adjusted by means of a potentiometer located in the fascia of the instrument. The range of variation is between 5 Volt DC and 24 Volt DC.

Power supply: mains powered

Function: Stabilised transducer/transmitter power supplies with one isolated output. The output is factory set to customer requirements in the range 5 Volt DC to 24 Volt DC. The output(s) is/(are) user adjustable ±10% for fine tuning.

Power supply: mains powered

Function: Stabilised transducer/transmitter power supplies with two isolated outputs. Each output is factory set to customer requirements in the range 5 Volt DC to 24 Volt DC. The output(s) is/(are) user adjustable ±10% for fine tuning.

Power supply: mains powered

Function: The PU700 is a stabilised instrument power supply that will convert 120 Volts AC, 240 Volts AC 50/60 Hz or 24 Volt DC into a factory set DC Voltage output capable of sourcing 100mA. The output voltage can be factory set at a variety of levels from 5 Volt DC up to 24 Volt DC.

The PU700 has as standard a Remote Voltage Sensing capability to allow for voltage compensation when using extra long output cable lengths.

Power supply: mains or DC